expr:class='"loading" + data:blog.mobileClass'>
Showing posts with label Basic Of Automobile. Show all posts
Showing posts with label Basic Of Automobile. Show all posts

02 May 2018

Can we predict the futuristic goals of The Autonomous car sector?

Tesla had already launched its Seld-Driving mode car "Model-3" which is generally known by AUTOPILOT MODE. which will be definitely gonna be more interesting as the only goal is to develop more comfort & artificial intelligent security. But the question still remains the same for all "What can we predict from self-driving cars in nearest future?" Can an autonomous car be truly safe in the world with the various driving condition and as more secured to human error? 


As per my opinion, it truly depends on the driving condition. suppose you are late for office and you have less time to reach office. OF COURSE! you could choose self-driving mode & spend some moments to relax your mood. And if it is weekend, then truly you will enjoy a long drive with Manual Driving mode with your family. yes, its truly depend on you. lot's of people like driving, and on the other way idea to give control of your car to an intelligent machine!  But this is only possible when the autonomous car manufactures shows green signals to safer Seld-Driving experiences to the public.

we can not forget the headlines from the past few years that up to 15% of new vehicles sold by 2030, it could be autonomous. as per the reply of  Hans-Werner Kaas, " obviously technology will remain the first question at all. Autonomous means more sensors, followed by a combination of multiple sensor technologies in one. but the technological barriers are still the same."

There is a solution called "Level four Driving". yes! currently manufactures are working on the same subject considering various on-road conditions.  The very first need is to set up roads in the way that can easily transmit data to hardware module & ensure that car is actually safe. To strike the balance between these two things technological improvement should be higher. on the other hand, the thing which matters to all customers about vehicle hardware. which means multiple sensors working capability, sufficient computer power within the car, advanced algorithms that detect pictures within the fraction of second and work on it. combining all the sensors, hardware modules and software solutions are they actually helpful in real traffic situation? That's the real technological challenge for manufacturers. But suppose you are on a highway, separated lanes, good weather, all good with traffic signals, it could be less complicated for AI machine to figure out an exact solution. which is only possible when the car is on a wide highway, Ex. Europe. but it cant be helpful to the small city with average road conditions. 

For a working autonomous vehicle, manufacturers should have a clear vision about emerging technologies that could be more helpful to sustain it against predicted errors. when its all about sensors, can camera-based sensor be still useful?  The main thing is to detect visual surrounding of the car in any conditions so the input will differ from light-based pictures to the ultrasonic pictures. so it could be really really difficult to combine all these input conditions and make a single algorithm.

still, we have some points that shouldn't be forgotten. When the whole point is about electrifician, it should be more efficient and sustainable with the environmental condition. second is Digitalization of connectivity. so it should be very large that can useful for one car to other, Wirelessly or wired. Third is advance driver assistance. It's the only thing that is too useful to move from driver operated car to driverless. so it could be more advanced with diverse of mobility that one can switch from one to other. It could be more attractive to the customers if they get a single variant for all seasons. Like you preferably choose SUV for winter, a convertible for summer and something other for another season. some of the manufacturers like Tesla, Google, Honda, Mercedes-Benz, Volkswagon, Volvo, TATA, Scania, BMW, Delphi & GM are on the same thing to design a complete package that can fir in any season. and what else it could be, may be we all get to know about it in future.

20 June 2017

Tesla's model S: Secret unveiled: A brief technical inspection

We all know that how Tesla's Model S is being too popular among the people of US, Canada and other countries but still many people don't know the proper reason behind the technical reasons so we are now going to look deeply into Tesla's battery system, power drive, gearbox, extra usable space, Wheel Drive, Security and other extra features.

Here is the first thing that Tesla introduced The battery system, not by using a huge battery pack system but instead of it they use small battery cells in series and parallel which are quite too many to arrange it.



The main advantage of the small battery system is there is no extra loss of heat during the drive went to cells are in proper working condition. It is the mean this advantage of use battery system that heats up more when the battery is in full working condition.here Tesla introduced a new system to avoid extra heat from the battery back to install a coolant system between the path of series and parallel system.this may help a car system to remain cool during full working condition and to work efficiently for longer Time than forecasted. Both systems give same power but the small better system is too easy for handling and there are no further issues of heating anymore. 


The second thing is the power Drive approximately 100 years ago Nicola Tesla invented is AC power drive which is generally called synchronous motor.  to convert DC's power into AC there should be an inverter so Tesla introduced a combined power drive system which contains an inverter and a synchronous motor we all know that too very the speed of synchronous motor there should be a change in frequency of AC power. Which can easily be provided by inverter by the higher frequency of AC power they should be a higher rotation of output shaft of the synchronous motor not only because of this combined power drive system there is no need for gearbox system. The Accelerator is directly connected to inverter through a microchip which controls the frequency of AC power from the small battery pack system. 

In engine power-driven vehicles it is the main disadvantage that System cannot go further limit of RPM like 2000 to 4000 RPM. But in the case of the inverter and synchronous motor combined system we can go to 17 to 18000 rpm in short range of time. There is no gearbox so the friction loss is not their overall the total power can directly transmitted by the power system. 



so that it can be also helpful for overall efficiency when the weight of the car is too low when the gearbox and the engine are absent. In addition to that, we have more extra space for usability. 

The third one Tesla used simple open differential system instead of highly complicated slip differential system.  the main reason behind using open differential system is it can transmit more torque then slip differential system. The traction control problem can be controlled by selecting backing and cutting the power supply. Weather in IC Engine cutting the power supply is not too responsive to traction control problem.  In this system, the power supply rate is highly responsible for using controllers and algorithms.  They just replace the large complicated system with a smart software.

It used the single speed transmission system that transfers the power by two steps. It is much is here to reverse them. The vehicle by only changing the face of induction motor the RMF changes into opposite direction and as an output drive will rotate in reverse direction.
In addition, the regenerative braking system is too useful. it means that RGB saves the K.E. of the car into electricity. In such case the same induction motor works as a generator, here will drive is the induction motor and Powell stored back to the battery pack.

These are the main reason that Tesla's Model S is more efficient than any other IC engine powered vehicle.




06 June 2017

Rolls-Royce : Top Unknown facts about luxury car manufacturer : You must know

Some interesting facts about Rolls-Royce: We all know that the market value of Rolls- Royal is much more than any normal automotive because of the higher luxurious interior and exotic outlook with the Black horse performance and much more..... 



  • The first 10 HP Rolls-Royce was sold for $395 today it works over two lakh and 50,000.
  • More than 60 out of 10 Rolls-Royce motor cars built are still Road wordy which is too good for Rolls-Royce to be in the market.
  • Most of us don't know that the Rolls-Royce radiator grille is entirely made by hand and inspect by eye. There are no measuring instruments are used for radiator grill. 
  • Approximately it takes one man one day to make grill or radiator and then total five hours are spent to repolishing it.
  • The Rolls-Royce radiator was the only one that does not recognize as a trademark until 1974.
  • Actually, Rolls-Royce made rifles during the First World War. 
  • It takes over 800 main powers to make a complete body of phantom 5.
  • Rolls-Royce is the only one manufacturer that engine is completely made by hand and even today latest models of Rolls-Royce engine is entirely made by Humans. 
  • It's shocking that the cooling capacity of the air-conditioning system in the silver spirit is the same is 30 domestic refrigerators.
  • before the world war Rolls-Royce did not make a complete car but the only chassis. The body is being added by outer coachbuilders.
  • It was a time when Rolls-Royce engine makes world records in speed in the air on the land and on the water Simultaneously.
  • there are total 27 electric motors used in every Silver Spirit. Each glass of the spirit is given a final polish with the fine grain  Pumice which is generally used for polishing optical lenses.
  • The hydraulic tappers on Rolls-Royce motor car are given a natural finish of 16th million of an inch.

19 April 2017

Top 10 Vehicle Safety Devices


If you are purchasing a new vehicle, make sure that it has as many of these safety devices as possible, to ensure the safety of you and your loved ones. It may cost a little bit extra, but it is definitely worth it if these things are going to save lives.

There are many other new safety devices that are helping to keep people safe while they are on the roads.

Sometimes, we wonder if technology is hurting more than helping us, and in some cases, it may be. One way that today's technology is really helping us is by providing us with many more devices in our vehicles to keep us safe. Throughout the history of motor vehicles, there have been some significant changes. For instance, in the beginning, vehicles didn't even have seatbelts or windshield wipers. We have come a long way since Henry Ford first started rolling cars off the assembly line. Today's automobiles have all kinds of wonderful features designed to keep you and your loved ones safe.


Here are 10 of the top vehicle safety devices you need to be aware of, especially when purchasing a 
 new vehicle:

Top 10 Vehicle Safety Devices

[1] Airbags

Some people think that these are actually dangerous, but they have in fact saved many, many lives. There are two main types of air bags, dual stage airbags and side airbags. If needed, the dual stage airbags will go off at different times, one in a minor accident and both in a more serious crash. Side airbags help to prevent drivers and passengers from getting head injuries. Small children should be in their car seats, in the back seat of your vehicle, where there are no airbags that can actually injure them rather than save their lives.

[2] On/Off Switches


Many vehicles are equipped with on/off switches for airbags. This is for the times when children are going to be sitting near them. There have been many instances of airbags injuring children, and you can eliminate this risk by using the switch. There have been many incidents of injuries and even death in small children because of airbags, and this switch will eliminate that problem.


[3] Passenger Sensing System

This has been created to reduce injuries or death to smaller children. This is an advanced airbag system that can tell the size of the person in the seat, with sensors that get information about the front-seat passenger's weight and the pressure on the seat. This information tells the airbags whether or not to go off in the event of a frontal crash.


[4] Energy-Absorbing Steering System


This is designed so that it will compress upon impact, lessening the risk of rib injuries to drivers. This has been proven to work in many instances, and it has reduced the risk of driver fatalities by 12%, and serious injuries and death risks have been reduced by 38%. When there is a crash, drivers are often thrown forward, and the steering wheel can cause serious injuries, making this feature one that you should look for in your next vehicle.


[5] Back Up Sensing System

This is a wonderful little invention that makes it so that when you are backing up, you will be warned if you get too close to another vehicle or other object. This is now an option on a number of larger vehicles, such as RV's and SUV's, and it has greatly reduced the number of collisions caused by backing up, and a lot of bicycles in driveways have been saved because of this feature.

[6] Electrochromatic Mirror/Auto Dimming Mirrors

One thing that can really be annoying when you are driving at night is the reflection of headlights in your mirrors. This feature will automatically darken the mirrors, which in turn reduces the glare. Today, approximately 10% of all vehicles are equipped with this feature, and many more vehicles are expected to have this technology in the near future. This not only helps to prevent accidents, it also helps people who are extremely light sensitive, and bothered by lights in their mirrors.

  

[7] Head Restraints

Two of the most common injuries that occur due to automobile accidents are head injuries and whiplash. These head restraints, which are on the top of the front seats, will help to hold the head in place, and they reduce these types of injuries. New and more advanced systems make it so the seat will move down and back in the event of a collision, so there will not be as much forward motion, which of course will lessen the risk of head and neck injuries.


[8] Heads Up Display

One should never take their eyes off the road while they are driving, but we all do. We must look down to check our speed and other things, and it can only take a split second for an accident to occur. A heads up display (HUD) will put the information you need right across your windshield, so your eyes never have to look anywhere but at the road. You will still be able to watch what you are doing, while being able to find the information you need quickly and easily.

[9] Padded Knee Bolster

Knee injuries are a common result of automobile accidents, and this device can greatly reduce the risk of this type of injury. This is another feature that can keep the driver or passengers in the proper position to lessen their chances of being injured. It will also help to keep passengers from sliding beneath the instrument panel and risking becoming trapped or injured even further.


[10] Seatbelts

These may have been around for many years, but many advancements have been made so that they will protect automobile occupants even more than the older versions. Unlike in the past, where seatbelts just went around your waist, today's vehicles are equipped with front and rear seat belts for both the lap and shoulders, and the locking system insures that those wearing the seat belts (which is the law in Canada and the US) will not be thrown forward if an accident occurs.


29 September 2016

Why batteries are more powerful than Gasoline ?

It's trending now a days that automotive vehicles is propelled by Batteries than gasoline fuel. There are many clear advantages of use batteries. some are listed below..
  • One time investment
  • More economic than gasoline
  • Turbo Charger that helps to charge batteries in few minutes
  • Charging station is available at may points which are few miles away from each other.
  • it provides more comfortable space

One time investment

it is face that most of batteries are costlier. the main reason is that the materials used in batteries. It's Lithium Ion. Which is more costlier than other materials. So its obvious thing that the manufacturing cost is higher of batteries.

economic than gasoline

Now a days  except the Gulf countries gasoline prices are hiked much and much. import and export charges added to its value extra. So it will be difficul to anyone that beat this kind of Mony exchange programme with transportation. On the other hand Batteries are easy to charge with any kind of power sources. Like Renewable  as Solar ., Wind etc. As well as it is more economica than gasoline.

Turbo Charger that helps to charge batteries in few minutes

Recently Tesla invented fastest method to charging batteries. With the use of high Current with supportive cunductors it is possible to charge your batteries in just few minutes. When Turbo charging was invented then it become possible. It's benn used in many appliances like mobile phones to Charge batteries in few minutes.

Charging stations

Cad manufacturers already know the capacity of any batteries that how much it can hold power to propell the engine. So that values make important decision. All bt all these calculations station points will be decided. So that customer wil never feel and problematic situation in any places. Generally Outside of india charging stations are available at Hotels , restaurant, toll bar etc.

 more comfortable space

If we use conventional methid to propell vehicle by engine, it required more space to handle this all messy things. On the other hand Batterues and individual motors only used for main propelling unit. So it provides more comfortable space than other vehicles.

overall,
Batterie powered vehicles don't pollutants tge environment. This is most important topic that has more weights than  gasoline. The servicing cost of gasoline engine is too higher than batteries. There is only things that have to change in batterie powered vehicle that to change Wheels and tyres. No any other maintanace cost. that  is tye big point that these all vehicles make unique impression in market to make more clean environment.




14 September 2016

Types of control switches used in Automobile


Introduction:

There are three basic types of control switches. These are low, dual and high pressure switches. Pressure sensors and Trinary switch are also used.

Pressure switching devices : 

Low pressure switch   


Reacts to the pressure in the low side (suction side) of the system, generally the accumulator and disengages the compressor clutch if the pressure drops below approximately 1.5 bar.On an FOV system the low pressure switch and cycling switch are often the same device.

Dual pressure – high pressure switch and condenser fan switch


Two pressure-sensitive switches are contained in the high pressure switch. One of these switches acts as a safety switch to prevent excessive system pressure.The second switch switches the condenser auxiliary fan on to its second setting at approximately 20.7 bar and off again at 17.2 bar.This switching process improves the performance of the system in cases of excessive heat.

High pressure switch

A single normally closed pressure switch de-energises the compressor if excessive high pressure exists within the A/C system, approximately 30–35 bar. The switch is normally positioned in the high side of the system.

Trinary switch       

Three pressure sensitive switches are integrated into a trinary switch. A low pressure switch which creates an open circuit thus removing the current flowing to the compressor if the system pressure drops below approximately 1.4 bar. This could be caused by a refrigerant leak or natural discharge over a number of years.A high pressure switch operates at a pressure of approximately 30 bar which again removes the A/C compressor’s current in the event of a system blockage anywhere in the system.The third switch is used for high speed operation of the condenser fan aiding the removal of heat. This operates at approximately 18 bar. The switch is positioned on the high pressure side on TXV controlled systems.If FOV is used then a cycling switch is incorporated into the low side with a dual pressure switch on the high side. Modern A/C systems are replacing switches with a single pressure sensor.

 Pressure sensors   


The pressure sensor contains two metal plated ceramic discs mounted in close proximity. The disc located closest to the pressure connection is thinner and bends when subjected to pressure.By this means, capacitance between the metal plating of the discs is changed based on the pressure. A circuit integrated in the sensor converts the capacitance to an analogue voltage.

13 September 2016

Different types of starting motors used in Automobiles

Introduction:         

This system uses a brake fluid (Preferably ethylene glycol) to transfer the pressure applied by the operator from the controlling unit to the actual brake mechanism, which is usually at or near the wheel of the vehicle. Most vehicles in India prefer to have drum brakes on rear wheels while disk brakes on the front wheels attached to the hydraulic controlling unit.

In order to produce the combustible mixture, Compression stroke and a form of ignition the minimum starting speed must be achieved. This is where the electric starter comes in. It is not possible to view the starter as an isolated component within the vehicle electrical system. The battery in particular is of prime importance. Another particularly important consideration in relation to engine starting requirements is the starting limit temperature. As temperature decreases, starter torque also decreases and the torque required cranking the engine to its minimum speed increases.

TYPES OF STARTER MOTORS:

Inertia starters   

            In all standard motor vehicle applications it is necessary to connect the starter to the engine ring gear only during the starting phase
  • The inertia type of starter motor is a four-pole, four-brush machine and is used on small to medium-sized petrol engine vehicles
  • It is capable of producing 9.6 Nm with a current draw of 350 A.
  • It has a face-type commutator and axially aligned brush gear. 
  • The fields are wave wound and are earthed to the starter yoke.
  • The starter engages with the flywheel ring gear by means of a small pinion.


Working:

  • When the starter is operated, via a remote relay, the armature will cause the sleeve to rotate inside the pinion.
  • The pinion remains still due to its inertia and, because of the screwed sleeve rotating inside it; the pinion is moved to mesh with the ring gear.
  • When the engine fires and runs under its own power, the pinion is driven faster than the armature shaft. This causes the pinion to be screwed back along the sleeve and out of engagement with the flywheel.
  • In some applications the pinion tends to fall out of mesh when cranking due to the engine almost, but not quite, running.

Pre-engaged starters

  • Pre-engaged starters are fitted to the majority of vehicles in use today.
  • They provide a positive engagement with the ring gear, as full power is not applied until the pinion is fully in mesh.
  • They prevent premature ejection as the pinion is held into mesh by the action of a solenoid.
  • A one-way clutch is incorporated into the pinion to prevent the starter motor being driven by the engine.

Permanent magnet starters

  • The principle of operation is similar in most respects to the conventional pre-engaged starter motor.
  • The main difference is the replacement of field windings and pole shoes with high quality permanent magnets.
  • The reduction in weight is in the region of 15% and the diameter of the yoke can be reduced by a similar factor.
  • Permanent magnets provide constant excitation and it would be reasonable to expect the speed and torque characteristic to be constant.
  • However, due to the fall in battery voltage under load and the low resistance of the armature windings, the characteristic is comparable to series wound motors.

Heavy vehicle starters

            The types of starter that are available for heavy duty applications are many and are different as the applications they serve.
  • In general, higher voltages are used, which may be up to 110 V, and two starters may even run in parallel for very high power and torque requirements.
  • Large road vehicles are normally 24 V and employ a wide range of starters. In some cases the design is simply a large and heavy duty version of the pre-engaged type.

Automatic transmission and Torque converter

Introduction:

A torque converter is the component that makes automatic operation possible. An automatic gearbox contains special devices that automatically provide various gear ratios as they are needed.

AUTOMATIC GEARBOXES:

  • Most automatic gearboxes have three or four forward gears and one reverse gear. Instead of a gearstick, the driver moves a lever called a selector.
  • Some automatic gearboxes have selector positions for park, neutral, reverse, drive, 2 and 1 (or 3, 2 and 1 in some cases).
  • Some more sophisticated types with electronic control just have driven, park and reverse positions.
  • The fluid flywheel or torque converter is the component that makes automatic operation possible.
  • The engine will only start if the selector is in either the park or neutral position. In park, the drive shaft is locked so that the drive wheels cannot move.
  • It is also now common, when the engine is running, to only be able to move the selector out of park if you are pressing the brake pedal.
  • This is a very good safety feature as it prevents sudden, uncontrolled movement of the vehicle.

Fluid Flywheel principle

  • A fluid flywheel consists of an impeller and turbine, which are immersed in oil.
  • They transmit drive from the engine to the gearbox.
  • The engine-driven impeller faces the turbine, which is connected to the gearbox.
  • Each of the parts, which are bowl-shaped, contains a number of vanes.
  • They are both a little like half of a hollowed out orange facing each other. When the engine is running at idle speed oil is flung from the impeller into the turbine, but not with enough force to turn the turbine.
  • As engine speed increases so does the energy of the oil.
  • This increasing force begins to move the turbine and hence the vehicle.
  • The oil gives up its energy to the turbine and then recirculates into the impeller at the centre, starting the cycle over again.
  • As the vehicle accelerates the difference in speed between the impeller and turbine reduces until the slip is about 2%.
  • A good analogy for a fluid flywheel that you can try for yourself is to place two desktop-type cooling fans facing each other. Switch one on (the impeller) and the air it blows will drive the blades of the other (the turbine).
  • The torque converter delivers power from the engine to the gearbox like a basic fluid flywheel, but also increases the torque when the car begins to move.
  • Similar to a fluid flywheel, the torque converter resembles a large doughnut sliced in half. One half, called the pump impeller, is bolted to the drive plate or flywheel. The other half, called the turbine, is connected to the gearbox input shaft.

11 September 2016

Spark ignition advance Mechanism

Introduction:

            The purpose of spark advance mechanism is to assure that under every condition of engine operation, ignition takes place at the most favorable instant in time i.e. most favorable from a standpoint of engine power, fuel economy and minimum exhaust dilution. By means of these mechanisms the advance angle is accurately set so that ignition occurs before TDC point of the piston. The engine speed and the engine load are the control quantities required for the automatic adjustment of the ignition timing. Most of the engines are fitted with mechanisms which are integral with the distributor and automatically regulate the optimum spark advance to account for change of speed and load.

Ignition advance basics:

Ignition advance is the condition when ignition of fuel occurs earlier than the correct ignition timing. Ignition of mixture takes place near the end of compression stroke.If the ignition is advanced it means fuel-air mixture will burn too early before the end of compression stroke. In this case, the crank and connecting rod will have to push the piston in order to compress the gases (for completing the compression stroke). In this situation, the force applied on piston by the connecting rod in upward direction may not be able to overcome the downward force acting on piston.This downward force acting on the piston is due to enormous pressure generated by the combustion of fuel. Under this condition, the engine may stop or stall.Spark advance may also cause the fuel to explode suddenly under certain operating conditions.

TYPES OF SPARK ADVANCE:


Two automatic advance mechanisms are used for spark advance and retard in engines depending on engine speed and other operating conditions:

(a) Centrifugal spark advance mechanism.

(b) Vacuum spark advance mechanism.


Ignition timing is first set manually. After this these mechanisms are used to modify it suitably.

CENTRIFUGAL SPARK ADVANCE MECHANISM:  

This mechanism consists of two fly weights, a base plate, cam and a spring. Fly weights are also called advance weights. The base plate is fixed to the drive shaft.The fly weights are rotated by distributor drive shaft through the base plate. The weights are pivoted on the base plate and also attached to the cam with the help of springs. The cam is also joined with the distributor shaft through springs, flywheel and plate. If engine speed increases, the fly weights are displaced out radially due to centrifugal force acting on it. Movement of weights causes the ignition advance (spark advance). At low speeds there is no advance while it is full advance of very high speeds.


VACUUM ADVANCE MECHANISM:

Vacuum advance mechanism consists of a diaphragm whose movement automatically advances and retards the ignition depending upon engine speed and other operating conditions.On side of diaphragm is connected to the induction manifold and other side is connected to atmosphere. (Induction manifold is at lower pressure than atmospheric and this pressure depends upon engine speed). The diaphragm is connected to the distributor through a linkage.As engine speed increases the pressure on one side of diaphragm decreases. This change in pressure controls the movement of diaphragm which ultimately controls the ignition timings. At normal position of diaphragm the ignition timing is set at fully retarded position. As engine speed increases the ignition timings are advanced.

 

Basic of Tire Design in Automobile

Introduction:

Although tires are often taken for granted, they contribute greatly to the ride and steering quality of a vehicle. Tires contribute to directional stability of the vehicle and must absorb all the stresses of accelerating, braking, and centrifugal force in turns. Tire design varies depending on the operating conditions and the load capacity of the tire.

Tire Design  

Tire construction varies depending on the manufacturer and the type of tire. A typical modern tire contains these components:

1. Bead wire, 
2. Bead filler, 
3. Liner, 
4. Steel reinforcement in the sidewall, 
5. Sidewall with hard side compound
6. Rayon carcass plies, 
7. Steel belts, 
8. Joint less belt cover,  
9. Hard under tread compound,  
10. Hard high-grip tread compound

Tires designed for improved steering  

Tire design varies depending on the operating conditions and the load capacity of the tire.A tire designed for improved steering and handling characteristics has nylon bead reinforcement and a hard bead filler with a slim tapered profile.This type of tire is suitable for sports car operation because the design stiffens the tire and reduces tire deflection during high-speed cornering.However, this type of tire may provide slightly firmer ride quality.

The bead filler above the bead reinforces the sidewall and acts as a rim extender.Tire sidewalls are made from a blend of rubbers which absorbs shocks and impacts from road irregularities, prevents damage to the plies, and also contains antioxidants and other chemicals that are gradually released to the surface of the sidewall during the life of the tire.The cord plies surround both beads and extend around the inner surface of the tire to enable the tire to carry its load. The plies are molded into the sidewalls.Steel is the most common material in tire belts, although other belt materials such as polyester have been used to some extent.The bead filler above the bead reinforces the sidewall and acts as a rim extender.

22 August 2016

Carburetors Vs Fuel Injector Comparision

Carburetors :


The working of the carburetors is simple. The air consumption is by the air filter and the fuel intake comes in from the fuel tank. The air and fuel merger together in a fit ratio and then passes to the combustion house for blazing and production of power.Here, when the throttle is twisted, the air float to the carburetor is reproduced which causes a swoosh of sucking force and hereafter the fuel visit from the stork is increase providing acceleration.


Fuel injection (FI):



The working of the Fuel injection program is greater computerized and works on a lot of sensors. The fuel injection nozzle is provided instantly in the combustion chamber. The air intake is measured by the air sensor location inside. There is a pressure pump which pressurizes the fuel which allows it oncoming atomized and hereafter inside the combustion house, the spray is in the form of a mist which allows for complete and cleaner combustion. The fuel supply is retiring by the ECU which is the computer controlling all the electronics of the bike. So when the air supply is reproduced when the constrain is pulled, the air sensor detects the rebound which disclosure is by the time mentioned fed to the ECU so that consequently the fuel amount to be injected is reproduced as well.

Advantages of Carburetors:

  •  easy to handle and low-cost to replace.
  •  rapid servicing.
  • On the go tuning and decor possible can be perceived up separately without disturbing the engine.
Disadvantages of Carburetors:

  • Diaphragm inside is light as a feather and can erupt which will end up to have it replaced.
  • The tuning behavior needs a big screw driver and has to be done physically.
  • There is a actual amount of lag in the regulation of fuel delivery.Old technology.
  • The air-fuel mixture ratio is not constant.
Advantages of Fuel Injection:
  • Fuel visit from the stork is optimum and fuel atomizing allows for complete combustion.
  • increase in fuel efficiency and power output.
  • Acceleration acerbity increases.
  • The air fuel mixture can be transferred on the go using different fuel maps pre-loaded on the ECU for variable power outputs.
Disadvantages of Fuel Injection:

  • Servicing of the FI party is cumbersome.
  • If there is an ECU defect, the bike will stop to work.
  • It costs a lot and the service and maintenance is invaluable as well.
  • Producing new Fuel maps needs loads of expertise.
  • Procuring new fuel maps is a costly affair.
Even mutually all the advantages and disadvantages of both, Fuel injections still have the upper hand over carburetors only because of the quicker reaction and better power produce, and further not to mention that they do help free the emission levels a lot in check. So if given a choice, always go for the FI party fitted bike, for all that do remember that it will focus a premium.

YouTube - Auto Thunder

FB Video

Featured Post

Most Fun Cars Under $15,000

Driving for the sake of fun isn't always a good idea. With their wide-open engine bays and straightforward design, classic American auto...